meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
outdoor_station:feature_guides:sound_configurations [2019/03/22 14:47]
evelyn
— (current)
Line 1: Line 1:
-\\  
-======= Sound Configurations ======= 
-===== 1. Setup from website: ===== 
  
-\\ <fs medium><​ff sans-serif><​fc #​008000>​**✔ For devices with single button E21/ R20/ R23/ R26 and devices with multiple numeric keyboard R27:​**</​fc>​ Go to **Phone - Voice** to configure. 
-\\  
-\\ **Mic Volume:** To configure microphone volume. 
-\\  
-\\ {{ :​1.outdoor_station:​feature_guides:​outdoor_mic_volume.png?​nolink&​650* |Mic Volume}} 
-\\ **Speaker Volume:** To configure speaker volume. ​ 
-\\  
-\\ {{ :​1.outdoor_station:​feature_guides:​outdoor_speaker_volume.png?​nolink&​650* |Speaker Volume}} 
-\\ **Open Door Warning:** Disable it, users will not hear the prompt voice when the door is opened. ​ 
-\\  
-\\ {{ :​1.outdoor_station:​feature_guides:​outdoor_open_door_warning.png?​nolink&​650* |Open Door Warning}} 
-\\ **IP Announcement** (Devices with single button only): To setup the IP announcement active time. Over the configured value, the phone will not announce the IP when users hold the button. 
-\\  
-\\ {{ :​1.outdoor_station:​feature_guides:​outdoor_ip_announcement.png?​nolink&​650* |IP Announcement}} 
-\\ **RingBack Upload:** To upload the ring back tone by users themselves. ​ 
-\\  
-\\ {{ :​1.outdoor_station:​feature_guides:​outdoor_ringback_upload.png?​nolink&​650* |RingBack Upload}} 
-\\ **Opendoor Tone Upload:** To upload the open door tone by users themselves. 
-\\  
-\\ {{ :​1.outdoor_station:​feature_guides:​outdoor_opendoor_tone_upload.png?​nolink&​650* |Opendoor Tone Upload}} 
-\\  
-\\ <fc #​008000>​**✔ For devices with touch screen - R29:​**</​fc> ​ 
-\\  
-\\ Go to **Phone - Call Feature - Others** to configure call volume.\\ 
-\\  
-**Call Volume:** When R29 dials out a call, it will prompt the "​du"​ sound. To configure the call volume by users themselves. 
-\\  
-\\ {{ :​1.outdoor_station:​feature_guides:​outdoor_call_volume_r29.png?​nolink&​650* |Call Volume}} 
-\\ Go to **Phone - Voice** to configure mic volume. 
-\\  
-\\ {{ :​1.outdoor_station:​feature_guides:​outdoor_mic_volume_r29.png?​nolink&​650* |Mic volume}} 
-\\ Go to **Intercom - Door Setting General** to configure the open door tone.   
-\\  
-\\ {{ :​1.outdoor_station:​feature_guides:​outdoor_open_door_tone_r29.png?​nolink&​650* |Open door tone}} 
-\\ Go to **Phone - Import/​Export - Open Door Tone** to upload the open door tone by users themselves. \\ 
-\\  
-**Open Door Tone:** Disabled it, users will not hear the “the door is opened” announcement. 
-\\  
-\\ {{ :​1.outdoor_station:​feature_guides:​outdoor_open_door_tone_upload_r29.png?​nolink&​650* |Open door tone upload}} 
-\\ Go to **Intercom - Advanced - Open Door Warning** to configure open door warning.\\ 
-\\  
-**Open Door Warning:** Disable it, users will not hear the prompt voice when the door is opened or closed.</​ff></​fs>​ 
-\\  
-\\ {{ :​1.outdoor_station:​feature_guides:​outdoor_open_door_warning_r29.png?​nolink&​650* |Open Door Warning}} 
-==== 2. Setup from device:==== 
-\\ <fs medium><​ff sans-serif><​fc #​008000>​**✔ For devices with single button E21/ R20/ R23/ R26 and devices with multiple numeric keyboard R27:​**</​fc>​ N/A 
-\\  
-\\ <fc #​008000>​**✔ For devices with touch screen - R29:​**</​fc>​ Go to **volume** interface to configure. 
-\\  
-\\ **Call Volume:** When R29 dials out a call, it will prompt the "​du"​ sound. To configure the call volume by users themselves. \\ 
-\\  
-**AD Volume:** When the door is opened, the phone will announce the opendoor tone. To configure the AD volume by users themselves. \\ 
-\\  
-**Key Volume:** When touch the screen, that will be a prompt sound. To configure the key volume by users themselves.</​ff></​fs>​ 
-\\  
-\\ {{ :​1.outdoor_station:​feature_guides:​outdoor_volume_related_r29.png?​nolink&​350* |Volume related}} 
-\\  
-<note tip><​fs medium><​ff sans-serif>​Ringback and opendoor tone upload request: \\  
-**Size: **<200KB \\  
-**Format:** .wav \\  ​ 
-**Samplerate:​** 16000 \\  
-**Bits:** 16 \\ </​ff></​fs></​note>​