meta data for this page
  •  


RFID cards stored principles in R27 and R29



For example:
The card’s SN is 1D2FE87B which is 4 bytes.

When the card is enrolled by Akuvox R2X’s card reader, the card’s SN will be stored (It will be stored one byte by one byte) and display in the Akuvox R2X’s card management.

Card management
Users can select how RFID cards display in card management and read from Intercom-Advanced-RFID-RFID Display Mode.

Card display setting
8HN
The card is enrolled and display in Hexadecimal format.
When the card is enrolled, it will display 1D2FE87B in the card management part.

8HN&8HR
8HR
The card is enrolled in Hexadecimal format, and display in reverse Hexadecimal format.
When the card is enrolled, it will display 7BE82F1D in the card management part.

8H10D
The card is enrolled in Hexadecimal format, and display in Decimal format.
When the card is enrolled, it will display 489678971 in the card management part.

8H10D
6H8D
The card is enrolled in Hexadecimal format (Delete the first byte, and only take the last three bytes), and display in Decimal format.
When the card is enrolled, it will display 3139707 in the card management part.

6H8D
6H3D5D(W26)
The wiegand card is enrolled in Hexadecimal format (Only take the last three bytes), and display in Decimal format (Take the second byte for displaying first, and then take last two bytes for displaying).
When the card is enrolled, it will display 4759515 in the card management part.


6H3D5D6H3D5D