meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
outdoor_station:feature_guides:how_to_do_factory_reset_in_r2x [2019/06/26 15:38]
neil
— (current)
Line 1: Line 1:
-\\  
-====== How to do factory reset in R2X====== 
-\\ <ff sans-serif><​fs medium>​Users have two options for how to make a factory reset for R2X.</​fs></​ff>​ 
-<note tip><​ff sans-serif><​fs medium>​Reset to default state means all of the intercom parameters will be back to default state. Recommend users copy the intercom parameters to another storage for later use.</​fs></​ff></​note>​   
-==== Software reset: ==== 
-\\ <ff sans-serif><​fs medium>​Go to **Upgrade - Basic - Reset To Factory Setting** and click “Submit” to do reset.</​fs></​ff>​ 
-\\  
-\\ {{ :​1.outdoor_station:​feature_guides:​outdoor_reset.png?​nolink&​650* |Reset}} 
-==== HW reset:==== 
-\\ <ff sans-serif><​fs medium>​1. Take R2X apart.\\ 
-\\  
-2. Power R2X on.\\ 
-\\  
-3. Press the RESET button (The button named “SW3”).\\ 
-\\ 
-4. Release the RESET button until hearing “di” sound.\\ 
-\\  
-5. Power R2X off and power it on again. 
-\\  
-\\ ☛ **RESET button:** 
-\\  
-\\ **E21:​**</​fs></​ff>​ 
-\\  
-\\ {{ :​1.outdoor_station:​feature_guides:​e21_reset_button.png?​nolink&​350* |E21 RESET button}} 
-\\ <note tip><​ff sans-serif><​fs medium>​R20/​ R23/ R26/ R27/ R29 do not support this hardware reset method.</​fs></​ff></​note>​ 
-\\  
-\\ <ff sans-serif><​fs medium>​**Key for factory upgrade:​**</​fs></​ff>​\\ 
-\\ **R23/ R26:** 
-\\  
-\\ {{ :​1.outdoor_station:​feature_guides:​r26_reset_button.png?​nolink&​350* |R23 R26 RESET button}} 
-\\ **R27:** 
-\\  
-\\ {{ :​1.outdoor_station:​feature_guides:​r27_reset_button.png?​nolink&​350* |R27 RESET button}} 
-\\ **R29:** 
-\\  
-\\ {{ :​1.outdoor_station:​feature_guides:​r29_reset_button.png?​nolink&​350* |R29 RESET button}}