meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

outdoor_station:feature_guides:how_to_configure_snmp_in_r27 [2019/01/03 18:28] (current)
Line 1: Line 1:
 +\\ 
 +====== How to configure SNMP in R27======
 +\\ <ff sans-serif><​fs medium>​SNMP (Simple Network Management Protocol) is an Internet-standard protocol for managing devices on IP networks. ​
 +\\ 
 +\\ 
 +SNMP is widely used in network management system to monitor network-attached devices for conditions that may draw network administrative attention. ​
 +\\ 
 +\\ 
 +SNMP exposes management data in the form of variables on the managed systems, which describe the system configuration. These variables can then be queried by managing applications. These variables accessible via SNMP are organized in hierarchies,​ which are described by Management Information Bases (MIBs).</​fs></​ff>​
  
 +
 +==== How to configure in R27: ====
 +\\ <ff sans-serif><​fs medium>​Go to **Network - Advanced** to configure.\\
 +\\ 
 +1. Enable SNMP from drop-down list.\\
 +\\ 
 +2. Enter the port number and IP address /any valid URL domain name of trusted SNMP server.</​fs></​ff> ​
 +\\  
 +\\ {{ :​1.outdoor_station:​feature_guides:​outdoor_snmp_1_r27.png?​nolink&​650* |SNMP}}
 +==== After finish configuring in R27, users can test SNMP feature with MIB (Management Information Base) Browser tool. ====
 +\\ <ff sans-serif><​fs medium>​1. Run the MIB browser tool, we test the snmp feature via using tool named **iReasoning MIB Browser**;
 +\\ 
 +\\ {{ :​1.outdoor_station:​feature_guides:​outdoor_snmp_2_r27.png?​nolink&​650* |SNMP}}
 +\\ 2. Enter the IP address of R27 in the **Address** line, and click **Advanced** to enter the port **1024** and select the SNMP version to be **2**.
 +\\  
 +\\ {{ :​1.outdoor_station:​feature_guides:​outdoor_snmp_3_r27.png?​nolink&​650* |SNMP}}
 +\\ 3. Keep other settings as default, and click **Ok** to save. Make sure the R27 connect to MIB tool which it will prompt users.
 +\\  
 +\\ 4. Import the template file named **AKUVOX-R2X-MIB.txt** from **File -Load MIBs**;</​fs></​ff>​
 +<note tip><​ff sans-serif><​fs medium>​Please consult technical support for template file.</​fs></​ff></​note>​
 +\\ 
 +\\ <ff sans-serif><​fs medium>​5. Select the **private** folder, and then click the item to obtain the needed information from R27.</​fs></​ff>​
 +\\ 
 +\\ {{ :​1.outdoor_station:​feature_guides:​outdoor_snmp_4_r27.png?​nolink&​650* |SNMP}}
 +