How to configure RFID cards in R2X


Users can unlock via RFID cards.
Place cards in RFID card reader to unlock. If it is predefined card, R2X will announce “The door is now opened” and the screen (R27 and R29 only) will display “Open Lock Success.” If it is unregistered card, the screen (R27 and R29 only) will display “Open Lock Failed.”

R20 /R27 /R29 supports two types of RFID cards (depends on the model No): 13.56MHz and 125KHz. R23 /R26 supports 13.56MHz RFID cards (depends on the model No). E21 do not have access card reader module.

Setup from website:


Go to Intercom - Card setting to manage card access system.

Import/Export Card Data: R2X supports to import or export the card data file, which is convenient for dealing with a large number of cards.


Card upload

The maximum card data file is 200K which is around 500 cards for R23 /R26 /R27. The maximum card is 1000 for R29. Please consult technical support for the .xml format RFID cards template file.



Add card one by one:

1. Switch card status to “Card Issuing” and click “Apply”;

Card status
2. Place card on the card reader area and click “Obtain”;

3. Name card, choose which door users want to open and the valid day and time;

4. Click “Add” to add it into list.

Card Setting
5. Valid card information will be shown in the list. Users can delete one card’s access permission or empty the list.


Card management

Remember to set Card Status back to “Normal” after adding cards.


Card status

Setup from device:


For devices with single button - E21/ R20/ R23/ R26: N/A

For devices with multiple numeric keyboard - R27:

Press “*2396#” to enter administrator interface. Press “2” to enter admin settings interface. Press “2” to enter admin card setting interface.

Press “1” to quickly add an admin card. When users see “Please Swipe Admin Card…,” please place admin card in the RFID card reader area. After the screen shows “An admin card is added +1,” it means adding successfully.

Press “2” to delete the current admin card. When users see “Please Swipe Admin Card….,” and place the added admin card which users want to delete in the RFID card area. After the screen shows “An admin card is deleted,” it means deleting successfully.

Press “*3888#” to enter user interface. Press “2” to enter user card modify interface. Before adding or deleting users card, users need to swipe admin card or enter admin code.

Press “1” to add a user card, when users see “Please Swipe IC Card…,” place user card in the RFID card reader area. Then the screen will show “Add IC Card +1,” it means adding successfully.

Press “2” to delete the current user card. When users see “Please Swipe IC Card….,” and place the added IC card which users want to delete in the RFID card area. After the screen shows “An IC card is deleted,” it means deleting successfully.

For devices with touch screen - R29:

Press “Add Card,” when users see “Please scan the RFCard to Add,” and put the card near the card reader. Enter the name, choose valid day and time and choose which door users want to unlock. Click “√” to save.

Card
Press “Del Card,” when users see “Please scan RFCard to Delete,” put the exited card near the card reader, and click “Delete” to delete. Or users can just choose the existed card from the list, and delete directly.


Card