meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

outdoor_station:feature_guides:how_to_configure_led_status_in_r2x [2020/03/16 14:56]
inn
— (current)
Line 1: Line 1:
-\\  
  
-====== How to configure led status in r2x ====== ​ 
-\\  
-\\ <ff sans-serif><​fs medium>​✔ **<fc #​008000>​For devices with single button - E21/ R20/ R23/ R26:</​fc>​**</​fs></​ff>​ 
-\\ <ff sans-serif><​fs medium>​Users can control the call button area’s LED. </​fs></​ff>​ 
-\\  
-\\ <ff sans-serif><​fs medium>​Go to **Intercom - LED Setting** to configure. 
-\\ **State:** There is five states: Normal, Offline, Calling, Talking and Receiving. ​ 
-\\ **Color Off:** The default status is OFF.  
-\\ **Color On:** It can support three color: Red, Green, Blue.  
-\\ **Blink Mode:** To setup the different blink frequency. </​fs></​ff>​ 
-\\  
-\\ {{ :​1.outdoor_station:​feature_guides:​led_status_in_r26.png?​nolink&​650* |LED Status}} 
-\\ <ff sans-serif><​fs medium>​**LED Control:** Users can also use HTTP command to remote control the LED status. </​fs></​ff>​ 
-\\  
-\\ {{ :​1.outdoor_station:​feature_guides:​led_controls_in_r26.png?​nolink&​650* |LED control}} 
-\\ <ff sans-serif><​fs medium>​The format for the HTTP command is like:  
-\\ http://​PhoneIP/​fcgi/​do?​action=LedAction&​State=1&​Color=1&​Mode=2500 </​fs></​ff>​ 
-\\  
-\\ <ff sans-serif><​fs medium>​**State:​** 1=Idle; 2=OffLine; 3=Calling; 4=Talking; 5=Receiving; ​ 
-\\ **Color:** 1=Green; 2=Blue; 3=Red; ​ 
-\\ **Mode:** 0=Always On; 1=Always Off; 500/​1000/​1500/​2000/​25000/​3000</​fs></​ff>​ 
-\\  
-<note tip><​ff sans-serif><​fs medium>​The default LED status:</​fs></​ff>​ 
-{{ :​1.outdoor_station:​feature_guides:​led_status_in_r26_2.png?​nolink&&​400 |LED Status}} 
-</​note>​ 
-\\  
-\\ <ff sans-serif><​fs medium>​✔ **<fc #​008000>​For devices with multiple numeric keyboard - R27:</​fc>​**</​fs></​ff>​ 
-\\ <ff sans-serif><​fs medium>​Users can control three parts’ LED, screen, keypad and card area. </​fs></​ff>​ 
-\\  
-\\ <ff sans-serif><​fs medium>​Go to **Intercom - LED Setting** to configure. 
-\\ Users can also setup the valid time. For example, start time from 18 to 23 means the LED will light up from 6pm to 11pm.</​fs></​ff>​ 
-\\  
-\\ {{ :​1.outdoor_station:​feature_guides:​led_controls_in_r27.png?​nolink&​650* |LED control}} 
-\\ <ff sans-serif><​fs medium>​✔ **<fc #​008000>​For devices with touch screen - R29:</​fc>​**</​fs></​ff>​ 
-\\ <ff sans-serif><​fs medium>​Users can control card area’s LED. </​fs></​ff>​ 
-\\  
-\\ <ff sans-serif><​fs medium>​Go to **Intercom - LED Setting** to configure. 
-\\ Users can also setup the valid time. For example, start time from 18 to 23 means the LED will light up from 6pm to 11pm.</​fs></​ff>​ 
-\\  
-\\ {{ :​1.outdoor_station:​feature_guides:​led_controls_in_r29.png?​nolink&​650* |LED control}}