meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
outdoor_station:feature_guides:how_to_configure_dtmf_keys_in_r2x [2019/04/28 17:04]
inn
— (current)
Line 1: Line 1:
-\\  
-====== How to configure DTMF keys in R2X====== 
-<note tip><​ff sans-serif><​fs medium>​Users can unlock via entering a DTMF code during the call.</​fs></​ff></​note>​ 
- 
-==== How to configure direct IP call:==== 
-\\ <ff sans-serif><​fs medium>​Go to **Intercom - Relay** to configure DTMF code.\\ 
-\\ 
-\\ **DTMF Option:** To select digit of DTMF code, R2X support maximum to 4 digits’ DTMF code.\\ 
-\\ 
-\\ **DTMF&​Multiple DTMF:** To configure DTMF code for remote unlocking.</​fs></​ff>​ 
-\\  
-\\ {{ :​1.outdoor_station:​feature_guides:​outdoor_dtmf_1.png?​nolink&​500* |DTMF}} 
-\\ <note tip><​ff sans-serif><​fs medium>​E21/​ R20/ R23/ R26 has two relays, so it can have two DTMF codes for unlocking. R27 /R29 has three relays, so it can have three DTMF codes for unlocking.</​fs></​ff></​note>​   
- 
-<note important><​ff sans-serif><​fs medium>​The caller must be on the door phone'​s **push button list (for R20, R23, R26)** or **phonebook (for R27, R29)**, and then it can be unlocked during the call.</​fs></​ff></​note>​ 
- 
- 
-==== How to configure type of DTMF:==== 
-\\ <ff sans-serif><​fs medium>​Go to **Account - Advanced - DTMF** to configure DTMF type.\\ 
-\\ 
-\\ **Type:** Support inband, info, RFC2833 or their combination.\\ 
-\\ 
-\\ **How To Notify DTMF:** Only available when DTMF type is info.\\ 
-\\ 
-\\ **DTMF Payload:** To configure payload for DTMF.</​fs></​ff>​ 
-\\  
-\\ {{ :​1.outdoor_station:​feature_guides:​outdoor_dtmf_2.png?​nolink&​500* |DTMF}} 
- 
-<note important>​Link of configure relay on indoor monitors, the corresponding DTMF code must be the same as door station</​note>​ 
-\\ 
-<ff sans-serif><​fs medium>​Please refer to [[indoor_monitor:​feature_guides:​how_to_configure_dtmf_types_in_indoor_monitor|How to configure DTMF types]] for more details.</​fs></​ff>​