meta data for this page
  •  

How to configure direct IP call in R2X without SIP proxy



Direct IP call means that Akuvox door station can dial out calls by entering other phones' IP addresses which users do not need to install extra SIP servers.

To dial a direct IP call out:
1. Users need to know other phones' IP addresses.
2. Devices should all be in the same local network.

How to configure direct IP call:


For devices with single button - E21/ R20/ R23/ R26:
Go to Intercom - Basic - Push button and fill in devices’ IP addresses.

Push button
After configuring, users can press push button to call device or multiple devices at the same time.

For devices with multiple numeric keyboard - R27:
Users can press the device’ IP address in numeric keyboard to dial out. For example, users can press 192*168*35*7 and press dial key to call to device with IP address 192.168.35.7.

Direct IP call
For devices with touch screen - R29:
In dial interface, users can press the device’ IP address in touch screen to dial out. For example, users can press 192*168*16*220 and press dial key to call to device with IP address 192.168.16.220.


Direct IP call