meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
outdoor_station:feature_guides:how_to_configure_call_related_parameters_in_r2x [2019/04/12 16:22]
neil
— (current)
Line 1: Line 1:
-\\  
-====== How to configure call related parameters in R2x ====== ​ 
-\\  
-\\ <ff sans-serif><​fs medium>​**<​fc #​008000>​1.</​fc>​** Go to **Intercom - Basic** to configure call time period and dial in/out time.</​fs></​ff>​ 
-\\  
-\\ {{ :​1.outdoor_station:​feature_guides:​max_call_time_in_r2x.png?​nolink&​650* |Max call time}} 
-\\ <ff sans-serif><​fs medium>​**Max Call Time:** To configure the max call time.</​fs></​ff>​ 
-\\  
-\\ {{ :​1.outdoor_station:​feature_guides:​max_dial_time_in_r2x.png?​nolink&​650* |Max dial time}} 
-\\ <ff sans-serif><​fs medium>​**Dial In Time:** To configure the max incoming dial time, available when auto answer is disabled. ​ 
-\\ **Dial Out Time:** To configure the max no answer call time. </​fs></​ff>​ 
-<note tip><​ff sans-serif><​fs medium>​The Dial In/Out Time is also related to SIP server'​s configurations when the call is a SIP call.</​fs></​ff></​note>​ 
  
-\\ <ff sans-serif><​fs medium>​**<​fc #​008000>​2.</​fc>​** Go to **Account - Advanced - Call** to configure SIP call related parameters.</​fs></​ff>​ 
-\\  
-\\ {{ :​1.outdoor_station:​feature_guides:​account_call_in_r2x.png?​nolink&​650* |SIP Call related parameters}} 
-\\ <ff sans-serif><​fs medium>​**Max Local SIP Port:** To configure maximum local SIP port for designated SIP account. 
-\\ **Min Local SIP Port:** To configure minimum local SIP port for designated SIP account. 
-\\ **Caller ID Header:** To choose caller ID header format automatically. 
-\\ **Anonymous Call:** If enabled, R29 series will block its information when calling out. 
-\\ **Anonymous Call Rejection:​** If enabled, calls who block their information will be screened out. 
-\\ **Missed Call Log:** If enabled, any missed call will be recorded into call log. 
-\\ **Prevent SIP Hacking:** Enabled the option for preventing the network SIP hacking when the devices are installed in public network.</​fs></​ff>​ 
-\\  
-\\ <ff sans-serif><​fs medium>​**<​fc #​008000>​3.</​fc>​** Go to **Network - Advanced** to configure.</​fs></​ff>​ 
-\\  
-\\ {{ :​1.outdoor_station:​feature_guides:​local_rtp_in_r2x.png?​nolink&​650* |Local RTP}} 
-\\ <ff sans-serif><​fs medium>​**Max RTP Port:** Determine the maximum port that RTP stream can use. 
-\\ **Starting RTP Port:** Determine the minimum port that RTP stream can use.</​fs></​ff>​ 
-\\  
-\\ <ff sans-serif><​fs medium>​**<​fc #​008000>​4. For devices with touch screen - R29:</​fc>​** 
-\\ Go to **Phone-Call feature** to configure.</​fs></​ff>​ 
-\\  
-\\ {{ :​1.outdoor_station:​feature_guides:​call_waiting_in_r2x.png?​nolink&​650* |Call waiting}} 
-\\ <ff sans-serif><​fs medium>​**Call Waiting Enable:** If enabled, it allows phones to receive a new incoming call when there is already an active call. 
-\\ **Call Waiting Tone:** If enabled, it allows phones to play the call waiting tone to the waiting callee. 
-\\ **On Code:** The code used to enable call waiting on server’s side, if configured, phone will send a SIP message to server to turn on call waiting on server side if user setup calls waiting is disabled. 
-\\ **Off Code:** The code used to disable call waiting on server’s side, if configured, phone will send a SIP message to disable call waiting on server side if user setup call waiting is enabled.</​fs></​ff>​