meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
outdoor_station:feature_guides:3_kinds_of_video_stream_in_r2x [2019/04/29 15:54]
cathy
— (current)
Line 1: Line 1:
-====== 3 kinds of video stream in r2x ====== 
-===== 1.Mjpeg Service===== 
-<note important>​The Mjpeg Service configuration is only available on R29.For other models,​mjpeg server is enabled by defaylt.Users can check both live view picture from website also check real-time picture via URL.</​note>​ 
-<ff sans-serif><​fs medium>​Login on the website, go to **Intercom** - **Advanced** - **Mjpeg Server** to configure.</​fs></​ff>​ 
-{{ :​1.outdoor_station:​feature_guides:​mjpeg.png?​nolink&​700 |}} 
- 
-\\ <ff sans-serif><​fs medium>​**Mjpeg Service Enable**: Use to capture from the URL. It is convenient to check the capture remotely.The user won't be able to check live view on web if turn off it.\\ 
-\\ 
-**Image Quality**: To choose the image quality of the capture.R29 supports 7 types of resolution: 1080P,​720P,​4CIF,​VGA,​CIF,​QVGA,​QCIF.\\ 
-\\ 
-\\ Picture URL:</​fs></​ff>​ 
-<​file>​ 
-http:// device ip:​8080/​picture.cgi 
-</​file>​ 
-<​file>​ 
-http://​device ip:​8080/​picture.jpg 
-</​file>​ 
-<​file>​ 
-http://​device ip:​8080/​jpeg.cgi 
-</​file>​ 
-<ff sans-serif><​fs medium>​Video URL:</​fs></​ff>​ 
-<​file>​ 
-http://​device ip:​8080/​video.cgi 
-</​file>​ 
- 
-==== 2.RTSP ==== 
- 
-<ff sans-serif><​fs medium>​R2x support RTSP stream, login to the website and go to **Intercom** - **RTSP** to enable or disable RTSP server.</​fs></​ff> ​ 
-\\ **RTSP Stream**: To enable RTSP video and select the video codec. R2X supports H.264 video codec by default. 
-{{ :​1.outdoor_station:​feature_guides:​rtsp_stream.png?​nolink&​700 |}} 
-\\ <ff sans-serif><​fs medium>​The URL for RTSP stream is:</​fs></​ff>​ 
-<​file>​ 
-rtsp://​IP_address/​live/​ch00_0 
-</​file>​ 
-<ff sans-serif><​fs medium>​R2X support 3 types of RTSP video codec: H264,​MPEG4,​MJPEG.\\ 
-\\ 
- 
-\\ **H.264 Video Parameters**:​ H.264 is a video stream compression standard. Different from H.263, it provides an approximately identical level of video stream quality but a half bit rate. This type of compression is sometimes called MPEG-4 part 10.  
-To modify the resolution, framerate and bitrate of H.264. 
-{{ :​1.outdoor_station:​feature_guides:​h264.png?​nolink&​700 |}} 
-\\ 
- 
-\\ **MPEG4 Video Parameters**:​ MPEG4 is one of the network video image compression standard. It supports the maximum compression ratio 4000:1. It is an important and common video function with great communication application integration ability and less core program space. To modify the resolution, framerate, and bitrate of MPEG4. 
-{{ :​1.outdoor_station:​feature_guides:​mpeg4.png?​nolink&​700 |}} 
-\\ **MJPEG Video Parameters**:​ Called motion joint photographic experts group. It is a video encoding format, in which each image is compressed separately by JPEG. MJPEG compression can produce high-quality video image and has a flexible configuration in video definition and compressed frames. 
-To modify the resolution, framerate and bitrate of MJPEG. 
-{{ :​1.outdoor_station:​feature_guides:​mjpeg_configure.png?​nolink&​700 |}} 
-\\  
- 
-==== 3.Video Codec ==== 
- 
- 
-<​note>​This is to configure video codec and resolution during video call.</​note>​ 
- 
- 
-\\ {{ :​1.outdoor_station:​feature_guides:​h264_video_parament.png?​nolink&​700 |}} 
- 
-\\ On the web portal, go to **Account** - **Advanced**. 
-\\ **Video Codec**: To configure the disabled codecs and enabled codecs by pressing the corresponding buttons. 
-\\ **Codec Resolution**:​ To adjust the resolutions for different video codecs. 
-\\ **Codec Bitrate**: To adjust the bitrate for different video codecs. 
-\\ **Codec Payload**: To adjust the codec payload for video codec. 
-