meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

multimedia_video_phone:features_and_configurations:how_to_setup_multicast [2019/01/23 16:06] (current)
Line 1: Line 1:
 +====== How to setup multicast ======
 +===== 1. Instruction =====
 +<fs medium><​ff sans-serif>​Multicast uses one-to-many mode to communicate in a range. ​ Akuvox Phone can be a listener part and also can be the listened part to realize Multicast communication. \\
 +Multicast address from 224.0.0.0—239.255.255.255,​ however not all multicast IP addresses are valid. Please consult your administrator for more information.
 +In this feature guide , we use Akuvox R4X Video phone as an example.</​ff></​fs>​
 +
 +===== 2. Configuration =====
 +==== 2.1 Listener part ====
 +<fs medium><​ff sans-serif>​1. To setup Multicast in the website.\\
 +\\ 
 +2. Go to the path:​Phone-Multicast.\\
 +\\
 +3. Paging Barge:​Choose the multicast priority number ,the range is 1-10.\\
 +\\
 +4. Paging priority Active: Enable o disable the multicast priority. The call from High priority listened part can be answered preferentially.\\
 +\\
 +5. Setup the listening IP address and port. The IP address need to be same as the listened part. And the multicast port can not be same for each IP Address.\\
 +\\
 +6. Click Submit button to save.</​ff></​fs> ​
 +{{ :​6.multimedia_video_phone:​features_and_configurations:​multicast1.png?​nolink&​600 |}}
 +<​note>​Akuvox Door Phone series only can be used as listener part now. More information please refer to the corresponding door phone user manual.</​note>​
 +
 +==== 2.2 Listened part ====
 +=== 2.2.1 Set up from website ===
 +<fs medium><​ff sans-serif>​1. Go to the website:​Phone-Ext Key; \\
 +\\
 +2. Choose Line Key/DSS Key/Ext Key to setup.(Not all phones supports DSS Key or Ext Key);\\
 +\\
 +3. To setup the Type as Multicast paging; \\
 +\\
 +4. Set the multicast IP address and port in Value area. The multicast IP address must be same as the listened part. Click Submit to save</​ff>​.</​fs>​
 +{{ :​6.multimedia_video_phone:​features_and_configurations:​multicast2.png?​nolink&​600 |}}
 +
 +
 +=== 2.2.2 Set up from Akuvox Phone ===
 +<fs medium><​ff sans-serif>​1.Enter the Dial interface;​\\
 +\\
 +2.Click Ext Key button to enter Ext setting interface;</​ff>​
 +</fs>
 +{{ :​6.multimedia_video_phone:​features_and_configurations:​multicast3.png?​nolink&​600 |}}
 +
 +<ff sans-serif><​fs medium>​3.Click Add Key;\\
 +\\
 +4.To setup the Type as Multicast Paging;\\
 +\\
 +5.Input the label you need;\\
 +\\
 +6.Set the multicast IP address and port in Value area. The multicast IP address must be same as the listened part. Click Confirm to save.</​fs></​ff>​
 +{{ :​6.multimedia_video_phone:​features_and_configurations:​multicast4.png?​nolink&​600 |}}
 +
 +=== 2.2.3 After you finish the intercom value settings ===
 +<fs medium><​ff sans-serif>​1.Press Apps Button {{:​6.multimedia_video_phone:​features_and_configurations:​multicast5.png|}} . Left slide to enter WIDGETS interface, find ExtKey. Drag it to the main interface;</​ff></​fs>​
 +{{ :​6.multimedia_video_phone:​features_and_configurations:​multicast6.png?​nolink&​600 |}}
 +
 +<fs medium><​ff sans-serif>​2.Enable the Extkey;\\
 +\\
 +3.Click Save button to save.</​ff></​fs>​
 +
 +=== 2.2.4 Using Multicast ===
 +<fs medium><​ff sans-serif>​1.Then press the Multicast Paging key;</​ff></​fs>​
 + {{ :​6.multimedia_video_phone:​features_and_configurations:​multicast8.png?​nolink&​600 |}}
 +<fs medium><​ff sans-serif>​2.The multicast call is answered automatically.</​ff></​fs>​
 +{{ :​6.multimedia_video_phone:​features_and_configurations:​multicast9.png?​nolink&​600 |}}