meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
multimedia_video_phone:features_and_configurations:how_to_setup_bluetooth [2019/03/21 17:58]
neil
multimedia_video_phone:features_and_configurations:how_to_setup_bluetooth [2019/03/21 17:59] (current)
neil
Line 16: Line 16:
 3.Tick or untick the option for Bluetooth.</​ff></​fs>​\\ 3.Tick or untick the option for Bluetooth.</​ff></​fs>​\\
  
-\\  
 ===== 2.Changing Bluetooth Device Name ===== ===== 2.Changing Bluetooth Device Name =====
 <fs medium><​ff sans-serif>​The VP-R48G uses “VP-R48G” as Bluetooth device name by default. The device name will be visible to other devices when connecting them. Follow the steps below to change the name:</​ff></​fs>​ <fs medium><​ff sans-serif>​The VP-R48G uses “VP-R48G” as Bluetooth device name by default. The device name will be visible to other devices when connecting them. Follow the steps below to change the name:</​ff></​fs>​
Line 28: Line 27:
 4.Click on Bluetooth settings icon {{:​6.multimedia_video_phone:​features_and_configurations:​47p_ble_icon.png?​nolink|}},​ pop up a drag-down box select **Rename this device** to enter a new name. Once done, click **RENAME label** to save.</​ff></​fs>​\\ 4.Click on Bluetooth settings icon {{:​6.multimedia_video_phone:​features_and_configurations:​47p_ble_icon.png?​nolink|}},​ pop up a drag-down box select **Rename this device** to enter a new name. Once done, click **RENAME label** to save.</​ff></​fs>​\\
  
-\\  
 ===== 3.Paring VP-R48G With A Bluetooth Device ===== ===== 3.Paring VP-R48G With A Bluetooth Device =====
 <fs medium><​ff sans-serif>​Before connecting VP-R48G with other Bluetooth device, users must pair them first. They will stay paired afterwards unless they are unpaired.\\ <fs medium><​ff sans-serif>​Before connecting VP-R48G with other Bluetooth device, users must pair them first. They will stay paired afterwards unless they are unpaired.\\
Line 44: Line 42:
 6.The discovered device will show in the available devices list with device ID. Make sure the Bluetooth device is active in pairing mode. Then tap on the **device ID** on the VP-R48G to pair them. Confirm the passkey in the prompted message (if any). Or if PIN is required, please refer to the device’s documentation or other procedures to obtain the PIN.</​ff></​fs> ​ 6.The discovered device will show in the available devices list with device ID. Make sure the Bluetooth device is active in pairing mode. Then tap on the **device ID** on the VP-R48G to pair them. Confirm the passkey in the prompted message (if any). Or if PIN is required, please refer to the device’s documentation or other procedures to obtain the PIN.</​ff></​fs> ​
  
-\\  
 ===== 4.Un-pairing A Bluetooth Device ===== ===== 4.Un-pairing A Bluetooth Device =====
 <fs medium><​ff sans-serif>​After successfully paired, the VP-R48G will show in **Paired devices** bar with paired device name.\\ <fs medium><​ff sans-serif>​After successfully paired, the VP-R48G will show in **Paired devices** bar with paired device name.\\