How to setup RPS in IP phone


Redirect Provisioning Server

A Redirect Provisioning Server(RPS) is a intermediate device that offers redirection service between Akuvox’s phone and Auto provisioning server. User’s phone can obtain auto provisioning URL from Akuvox RPS, then download the common.cfg or MAC.cfg file from Auto provisioning server.


*Akuvox’s phone can upgrade without manual configuration.

*Plug and play for customer.

*High efficiency for mass deploy.


1.Account for RPS

2.Auto provisioning server with configuration file(Common.cfg and/or MAC.cfg)

RPS principle

Configuration on Akuvox’s RPS

Create a new server

1.Log in the Akuvox’s RPS with provided account, and then click Servers on the left hand side menu.

2.Click Add to add new Auto Provisioning Server

3.Fill in the Server name and Auto provisioning server URL, then click Confirm to add new server on RPS.

Add new devices (binding to server)

1.Click Devices on the left hand side menu.

2.Then click the Add to add new device.

3.Select the provided company, and then fill in the device’s MAC address e.g. 0c1105020f0a. Choose corresponding Auto provisioning server, and fill in UserName and UserPwd(if available) then click Confirm.

Add multiple devices

To add multiple devices at once, user can upload pre-configured excel file with devices information and sever information.

1.Click Upload under Devices to upload the excel file.

2.Choose the excel file, then click Confirm.

Configuration on Akuvox IP Phone

To activate RPS service, please import the provision template cfg file with below settings and then reboot the phone, the phone will be updated via the rps feature.

Config.Autoprovision.REDIRECT.Url = \\
Config.Autoprovision.REDIRECT.Enable = 1
Currently all the Akuvox IP Phones have default factory setting with above configuration. IP Phone will automatically connect to RPS server to obtain provision file on first booting. If IP Phone successfully obtains the provision file, the RPS feature will be disabled(Config.Autoprovision.REDIRECT.Enable = 0). Otherwise the configuration remains the same.