meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

ip_phone:features_and_configurations:how_to_setup_multicast [2019/01/23 16:17] (current)
Line 1: Line 1:
 +====== How to setup multicast ======
 +===== Instruction =====
 +<fs medium><​ff sans-serif>​Multicast uses one-to-many mode to communicate in a range. ​ Akuvox Phone can be a listener part and also can be the listened part to realize Multicast communication. \\
 +Multicast address from 224.0.0.0—239.255.255.255,​ however not all multicast IP addresses are valid. Please consult your administrator for more information.In this feature guide , we use Akuvox R5X IP phone as an example.</​ff></​fs>​
 +
 +===== Configuration =====
 +==== Listener part ====
 +<fs medium><​ff sans-serif>​1. To setup Multicast in the website. \\
 +\\ 
 +2. Go to the path:​Phone-Multicast. \\
 +\\ 
 +3. Paging Barge:​Choose the multicast priority number ,the range is 1-10.\\
 +\\
 +4. Paging priority Active: Enable o disable the multicast priority. The call from High priority listened part can be answered preferentially.\\
 +\\
 +5. Setup the listening IP address and port. The IP address need to be same as the listened part. And the multicast port can not be same for each IP Address.\\
 +\\
 +6. Click Submit button to save.</​ff></​fs>​
 +{{ :​7.ip_phone:​features_and_configurations:​multicast.png?​nolink&​400 |}}
 +<​note>​ Akuvox Door Phone series only can be used as listener part now. More information please refer to the corresponding door phone user manual.</​note>​
 +
 +
 +==== Listened part ====
 +<fs medium><​ff sans-serif>​**Set up from website** \\
 +\\
 +1. Go to the website:​Phone-Key/​Display. \\
 +\\
 +2. Choose Line Key/DSS Key/Ext Key to setup.(Not all phones supports DSS Key or Ext Key) \\
 +\\
 +3. To setup the Type as Multicast paging. \\
 +\\
 +4. Set the multicast IP address and port in Value area. The multicast IP address must be same as the listened part. Click Submit to save</​ff></​fs>​
 +{{ :​7.ip_phone:​features_and_configurations:​key.png?​nolink&​400 |}}
 +
 +<fs medium><​ff sans-serif>​**Set up from Akuvox Phone** \\
 +\\
 +1. Go to the path:​Menu-Features-Programmable Keys. To choose Line Key or DSS Key.\\
 +\\
 +2. Press Switch softkey or Right/Left Key to setup the Type as Multicast Paging.\\
 +\\
 +3. Press Down Key to enter Label area. Input the label you need.\\
 +\\
 +4. Press Down Key to enter Value area. Input the IP address and Port. Press Save softkey to save.</​ff></​fs>​
 +
 +\\
 +
 +<fs medium><​ff sans-serif>​**After setup Multicast paging value** \\
 +\\
 +1.Then press the Multicast Paging key.\\
 +\\
 +2.The multicast call is answered automatically.</​ff></​fs>​
 +{{ :​7.ip_phone:​features_and_configurations:​mul.jpg?​nolink&​400 |}}
 +