meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

ip_phone:features_and_configurations:how_to_setup_call_transfer [2019/03/05 16:29]
127.0.0.1 external edit
ip_phone:features_and_configurations:how_to_setup_call_transfer [2019/04/01 17:25] (current)
neil
Line 5: Line 5:
 \\ \\
 **Consultation Transfer:** Transfer talking to the other person involved after the other person involved answer the incoming call and with consultation.</​ff></​fs>​ **Consultation Transfer:** Transfer talking to the other person involved after the other person involved answer the incoming call and with consultation.</​ff></​fs>​
 +\\ 
  
 ===== 1.Blind Transfer ===== ===== 1.Blind Transfer =====
Line 15: Line 16:
 \\ \\
 4.Return to the Idle interface automatically;</​ff></​fs>​ 4.Return to the Idle interface automatically;</​ff></​fs>​
 +<​note><​fs medium><​ff sans-serif>​The UI will display Hold status interface when the number you want to transfer to is not existed.</​ff></​fs></​note>​
  
 ===== 2.Semi-consultation Transfer ===== ===== 2.Semi-consultation Transfer =====
Line 33: Line 35:
 2.Press the OK key on the phone keyboard or the Dial key to make a call; \\ 2.Press the OK key on the phone keyboard or the Dial key to make a call; \\
 \\ \\
-3.Press the Trans softkey to finish transfer after the other person involved answer the incoming ​call and with consultation;​ You can finish transfer via putting down the handset ​or press the Cancel softkey ​to cancel ​transfer ​if you currently use handset ​to make or answer a call.</​ff></​fs>​+3.The third party answered ​the call, then press the Trans soft key or press Transfer Key  or hang up the handset ​to transfer.\\  
 +\\  
 +4.The phone will return ​to idle automatically.</​ff></​fs>​