meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

ip_phone:features_and_configurations:how_to_setup_blf [2019/01/18 15:45] (current)
Line 1: Line 1:
 +====== How to setup BLF ======
 +===== Instruction =====
  
 +<ff sans-serif><​fs medium>​**BLF:​** Busy Lamp Field is used to monitor a specific user for status changes on the pre-configured IP phone. BLF is most suitable for company reception. With extension modules, staff will be able to understand each status of monitored phone, so that he/she can determine whether transfer or forward call to that person, or even pickup the call if no one answer. It is also attractive for personal use, you will know the status of other side before you dial out. Therefore it is unnecessary to repeat calling till someone pickup the phone. A BLF button can be assigned to LINE key or DSS key or EXT key. After button are configured, its LED light will automatically up and change status according to BLF rule. \\ \\ 
 +In V3 version firmware, LED indication are are defined by default rule: \\  </​fs></​ff>​
 +{{:​7.ip_phone:​features_and_configurations:​blf1.png?​nolink|}} \\ 
 +^  LED indication ​ ^  LED status ^ ​ Description ​ ^
 +|  {{:​7.ip_phone:​features_and_configurations:​绿1.png?​nolink|}} ​ |  Solid green  |  The monitored user is idle.  |
 +|  {{:​7.ip_phone:​features_and_configurations:​绿2.png?​nolink|}} ​ |  Slow flash green  |  The monitored user is dialing or talking. ​ |
 +|  {{:​7.ip_phone:​features_and_configurations:​绿3.png?​nolink|}} ​ |  Fast flash green | ​ The monitored user receives an incoming call.  |
 +|  {{:​7.ip_phone:​features_and_configurations:​绿4.png?​nolink|}} ​ |  Off |  The monitored user does not exist. ​ |
 +
 +<ff sans-serif><​fs medium>​To satisfy more different needs, In V5 firmware version, Akuvox phone allow user to customize their own BLF rule, it is available by configure parameter in Auto provisioning file. The following content is just a example: \\ </​fs></​ff>​
 +<​file>​
 +Config.Features.BLFLED.TerminateForDual = 1   //​DSSkey BLF IDEL//
 +Config.Features.BLFLED.ProceedingForDual = 6  //DSSkey BLF incoming call//
 +Config.Features.BLFLED.ConfirmedForDual = 4   //​DSSkey BLF Talking//
 +Config.Features.BLFLED.ConfirmedHoldForDual = 5  //DSSkey BLF Hold//
 +Config.Features.BLFLED.TerminateForGreen = 1   //​LINEkey BLF IDEL//
 +Config.Features.BLFLED.ProceedingForGreen = 3  //LINEkey BLF incoming call//
 +Config.Features.BLFLED.ConfirmedForGreen = 2  //LINEkey BLF Talking//
 +</​file>​
 +<note tip>DSS key parameter range:0-6. \\ 
 +Line key parameter range:​0-3.</​note>​
 +{{:​7.ip_phone:​features_and_configurations:​blf1.png?​nolink|}} \\ 
 +^  LED indication ​ ^  Name  ^  Parameter ​ ^
 +|  {{:​7.ip_phone:​features_and_configurations:​绿4.png?​nolink|}} ​ |  off  |  0  |
 +|  {{:​7.ip_phone:​features_and_configurations:​绿1.png?​nolink|}} ​ |  Solid green  |  1  |
 +|  {{:​7.ip_phone:​features_and_configurations:​绿2.png?​nolink|}} ​ |  Slow flashing green  |  2  |
 +|  {{:​7.ip_phone:​features_and_configurations:​绿3.png?​nolink|}} ​ |  Fast flashing green  |  3  |
 +|  {{:​7.ip_phone:​features_and_configurations:​红1.png?​nolink|}} ​ |  Solid red  |  4  |
 +|  {{:​7.ip_phone:​features_and_configurations:​红2.png?​nolink|}} ​ |  Slow flashing red  |  5  |
 +|  {{:​7.ip_phone:​features_and_configurations:​红3_.png?​nolink|}} ​ |  Fast flashing red  |  6  |
 +<note tip>BLF function require platform support, for more information please contact your administrator. </​note>​
 +===== Configuration on Generic Platform =====
 +==== Configuration on Akuvox phone webpage ====
 +<ff sans-serif><​fs medium>​1.Go to the path **Phone - Key/​display** for line key configuration. \\ 
 +Or go to the path **Phone - DSS key** for dss key configuration. \\ 
 +Or go to the path **Phone - Ext key** for extension module button configuration. \\ </​fs></​ff>​
 +{{ :​7.ip_phone:​features_and_configurations:​blf2.png?​nolink |}} \\ \\ 
 +<ff sans-serif><​fs medium>​2.Select BLF from "​Type"​ category. \\ \\ </​fs></​ff>​
 +<ff sans-serif><​fs medium>​3.Enter desired "​Label"​ to display on the Phone. \\ \\ </​fs></​ff>​
 +<ff sans-serif><​fs medium>​4.Enter monitored number for BLF. \\ \\ </​fs></​ff>​
 +<ff sans-serif><​fs medium>​5.Select monitor account for BLF. \\ \\ </​fs></​ff>​
 +<ff sans-serif><​fs medium>​6. Click **Submit** to save configuration. \\ \\ </​fs></​ff>​
 +{{ :​7.ip_phone:​features_and_configurations:​blf_3.png?​nolink |}} \\ 
 +==== Configuration on Akuvox phone ====
 +<ff sans-serif><​fs medium>​1.Press **Menu**, then select and press **Features**. \\ </​fs></​ff>​
 +{{ :​7.ip_phone:​features_and_configurations:​blf4.jpg?​nolink |}} \\ 
 +<ff sans-serif><​fs medium>​2.Select and press **Programmable Keys**. \\ </​fs></​ff>​
 +{{ :​7.ip_phone:​features_and_configurations:​blf_5.jpg?​nolink |}} \\ 
 +<ff sans-serif><​fs medium>​3.Select and press **Line Key** or **DSS key** to configure a BLF button. \\ </​fs></​ff>​
 +{{ :​7.ip_phone:​features_and_configurations:​blf_6.jpg?​nolink |}} \\ 
 +<ff sans-serif><​fs medium>​4.Select or enter desired "​Type",​ "​Account",​ "​Label"​ and "​Value"​. \\ </​fs></​ff>​
 +{{ :​7.ip_phone:​features_and_configurations:​blf7.jpg?​nolink |}} \\