meta data for this page

Power supply

Akuvox indoor monitors support 2 methods to be powered up:

  • POE

Power up with a POE switch, users just need to connect Akuvox indoor monitor to the POE switch with a network cable. Please refer to the power consumption for all models.

  • Adapter

Power up with an adapter, you will need a 2-wire adapter(12V/1A) and test connector which is attached in the package.

The package doesn't include the adapter, please prepare the adapter on your own.

Connect the test connector and terminals at the back of indoor monitors.

Find the wires for powering up(12V&GND) and connect the adapter and the test connector with insulating tape.

Please pay attention to the positive and negative pole.