meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
indoor_monitor:feature_guides:how_to_configure_monitor [2019/03/06 19:33]
shirley
indoor_monitor:feature_guides:how_to_configure_monitor [2019/04/11 11:31] (current)
inn
Line 38: Line 38:
 **Password:​** To enter the password if required.\\ **Password:​** To enter the password if required.\\
 \\ \\
-2.On the web portal,go to **Phone** - **Monitor**,​ users can also setup the monitor information.(This configuration is the same as device, please refer to device configuration above.)</​fs></​ff>​+2.On the web portal, go to **Phone** - **Monitor**,​ users can also setup the monitor information.(This configuration is the same as device, please refer to device configuration above.)</​fs></​ff>​
 {{ :​2.indoor_monitor:​feature_guides:​live_view_web.png?​nolink&​400 |}}\\  {{ :​2.indoor_monitor:​feature_guides:​live_view_web.png?​nolink&​400 |}}\\ 
 ==== • Linux Indoor Monitor (C313/​IT80/​IT81) ==== ==== • Linux Indoor Monitor (C313/​IT80/​IT81) ====
  
 <fs medium><​ff sans-serif>​1. In the device, go to **More** - **Setting** - **Advance** - **Door Station**.</​ff></​fs>​\\ <fs medium><​ff sans-serif>​1. In the device, go to **More** - **Setting** - **Advance** - **Door Station**.</​ff></​fs>​\\
-\\ **Device Name:** To enter the ID number of doorphone, which could be set by users.\\  +\\ <ff sans-serif><​fs medium>**Device Name:** To enter the ID number of doorphone, which could be set by users.\\  
-\\ **URL:** To set the RTSP URL for the door phone. The RTSP format of Akuvox door phone is <​file>​+\\ **URL:** To set the RTSP URL for the door phone. The RTSP format of Akuvox door phone is</​fs></​ff> ​<​file>​
 rtsp://​device IP/​live/​ch00_0 rtsp://​device IP/​live/​ch00_0
 </​file>​ </​file>​
-\\ **Number:** To enter the IP address/SIP number of the corresponding camera. \\ +<ff sans-serif>​ <fs medium>**Number:** To enter the IP address/SIP number of the corresponding camera. \\ 
 \\ **User Name:** To enter the user name if required.\\ ​ \\ **User Name:** To enter the user name if required.\\ ​
-\\ **Password:​** To enter the password if required.\\ ​+\\ **Password:​** To enter the password if required.</​fs></​ff> ​\\ 
 +{{ :​indoor_monitor:​feature_guides:​linux_indoor_monitor_configuration_on_devices.png?​nolink&​400 |}} 
 + 
 +<ff sans-serif><​fs medium>​2.On the web portal, go to **Phone** - **Monitor**,​ users can also setup the monitor information. (This configuration is the same as device, please refer to device configuration above.)</​fs></​ff>​ 
 +{{ :​indoor_monitor:​feature_guides:​linux_indoor_monitor_config_on_web.png?​nolink&​400 |}}