How to configure monitor

Monitor feature enables users to view the real-time video from IP cameras or door phones anytime.

How to check the monitor


In the devie, click the “Monitor” icon on the homepage and choose the devices from the list. The real-time video from the door phone or IP camera will show in the screen .

Press the Monitor list in the right side to choose the outdoor videos.

Press List button in the bottom right corner to wake the outdoor video list.

Press Unlock to open the door which is connected with door phone.

Press Capture to take a screen shot of current interface.

Press Cancel to exit the monitoring.

Only under “Discovery mode”, users need to press “Update” key manually to synchronous the devices which are in the same node.

How to configure monitor

• Android Indoor Monitor (IT82/IT83/C315/C317)

There are two ways to configure: on device or on webpage

1. In the device, go to More - Settings - More - Monitor.
Number: To enter the IP address/SIP number of the corresponding camera. Enter the RTSP or ONVIF URL of the door phone or IP camera.

Doorphone ID/Device Name: To enter the ID number of doorphone, which could be set by users.

RTSP Address/Destination URL: To set the RTSP URL for the door phone. The RTSP format of Akuvox door phone is

 rtsp://device IP/live/ch00_0.

User Name: To enter the user name if required.

Password: To enter the password if required.

2.On the web portal, go to Phone - Monitor, users can also setup the monitor information.(This configuration is the same as device, please refer to device configuration above.)

• Linux Indoor Monitor (C313/IT80/IT81)

1. In the device, go to More - Setting - Advance - Door Station.

Device Name: To enter the ID number of doorphone, which could be set by users.

URL: To set the RTSP URL for the door phone. The RTSP format of Akuvox door phone is

rtsp://device IP/live/ch00_0

Number: To enter the IP address/SIP number of the corresponding camera.

User Name: To enter the user name if required.

Password: To enter the password if required.

2.On the web portal, go to Phone - Monitor, users can also setup the monitor information. (This configuration is the same as device, please refer to device configuration above.)