meta data for this page
  •  


How to configure multicast in R2X


Multicast uses one-to-many mode to communicate in a range. Akuvox products can be a listener part and also can be the listened part to realize multicast communication.

R2X can only be used as a listener part.


Multicast IP address is from 224.0.0.0 to 239.255.255.255.

Not all multicast IP addresses are valid. Please consult technical support for more information.


Go to Phone - Multicast to configure.

Paging Barge: Choose how many multicast IP addresses need to listen, and the range is from 1 to 10.

Paging priority Active: Enable or disable the multicast feature. The call from high priority listened part can be answered preferentially.

Multicast
Listening Address: Enter multicast IP address which users need to listen. The multicast IP address need to be same as the listened part and the multicast port can not be same for each IP address.

Label: Enter the label for each listening address.

Multicast

For listened part, please refer to how_to_setup_multicast.