meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
7.ip_phone:features_and_configurations:how_to_setup_multicast [2019/01/23 16:17]
inn
— (current)
Line 1: Line 1:
-====== How to setup multicast ====== 
-===== Instruction ===== 
-<fs medium><​ff sans-serif>​Multicast uses one-to-many mode to communicate in a range. ​ Akuvox Phone can be a listener part and also can be the listened part to realize Multicast communication. \\ 
-Multicast address from 224.0.0.0—239.255.255.255,​ however not all multicast IP addresses are valid. Please consult your administrator for more information.In this feature guide , we use Akuvox R5X IP phone as an example.</​ff></​fs>​ 
- 
-===== Configuration ===== 
-==== Listener part ==== 
-<fs medium><​ff sans-serif>​1. To setup Multicast in the website. \\ 
-\\  
-2. Go to the path:​Phone-Multicast. \\ 
-\\  
-3. Paging Barge:​Choose the multicast priority number ,the range is 1-10.\\ 
-\\ 
-4. Paging priority Active: Enable o disable the multicast priority. The call from High priority listened part can be answered preferentially.\\ 
-\\ 
-5. Setup the listening IP address and port. The IP address need to be same as the listened part. And the multicast port can not be same for each IP Address.\\ 
-\\ 
-6. Click Submit button to save.</​ff></​fs>​ 
-{{ :​7.ip_phone:​features_and_configurations:​multicast.png?​nolink&​400 |}} 
-<​note>​ Akuvox Door Phone series only can be used as listener part now. More information please refer to the corresponding door phone user manual.</​note>​ 
- 
- 
-==== Listened part ==== 
-<fs medium><​ff sans-serif>​**Set up from website** \\ 
-\\ 
-1. Go to the website:​Phone-Key/​Display. \\ 
-\\ 
-2. Choose Line Key/DSS Key/Ext Key to setup.(Not all phones supports DSS Key or Ext Key) \\ 
-\\ 
-3. To setup the Type as Multicast paging. \\ 
-\\ 
-4. Set the multicast IP address and port in Value area. The multicast IP address must be same as the listened part. Click Submit to save</​ff></​fs>​ 
-{{ :​7.ip_phone:​features_and_configurations:​key.png?​nolink&​400 |}} 
- 
-<fs medium><​ff sans-serif>​**Set up from Akuvox Phone** \\ 
-\\ 
-1. Go to the path:​Menu-Features-Programmable Keys. To choose Line Key or DSS Key.\\ 
-\\ 
-2. Press Switch softkey or Right/Left Key to setup the Type as Multicast Paging.\\ 
-\\ 
-3. Press Down Key to enter Label area. Input the label you need.\\ 
-\\ 
-4. Press Down Key to enter Value area. Input the IP address and Port. Press Save softkey to save.</​ff></​fs>​ 
- 
-\\ 
- 
-<fs medium><​ff sans-serif>​**After setup Multicast paging value** \\ 
-\\ 
-1.Then press the Multicast Paging key.\\ 
-\\ 
-2.The multicast call is answered automatically.</​ff></​fs>​ 
-{{ :​7.ip_phone:​features_and_configurations:​mul.jpg?​nolink&​400 |}} 
-