meta data for this page


This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
6.multimedia_video_phone:features_and_configurations:how_to_setup_vlan [2019/01/23 16:15]
— (current)
Line 1: Line 1:
-====== How to setup VLAN ====== 
-===== Instruction ===== 
-<fs medium><​ff sans-serif>​Virtual Local Area Network is a logical grouping of two or more nodes which are not necessarily on the same physical network segment but which share the same logical IP domain. To be specify, the purpose of VLAN is to separate layer 2 broadcast domain. Within trunk links, the tagged packet will only be send to those ports with same VLAN ID. This is usually achieved by switch or router.</​ff></​fs> ​ \\ 
-<fs medium><​ff sans-serif>​User can benefit from deployed VLAN, such as: \\ 
-*Security: if without VLAN, all host will be included in unique broadcast domain. Therefore, the consequence of ARP attack will affect all end devices in the organization.\\ 
-*Performance:​ The nature of network broadcast is to flood frames among the network. In certain condition, it is unnecessary to receive broadcast frame. To save bandwidth for high efficiency, it will be better to separate broadcast domain by deploy VLAN.</​ff></​fs>​ 
-{{ :​6.multimedia_video_phone:​features_and_configurations:​video_vlan1.png?​nolink |}} 
-===== Webpage setup ===== 
-==== Configuration on Webpage ==== 
-<fs medium><​ff sans-serif>​1. While visit phone webpage, go to path: Network→Advanced.</​ff></​fs>​ 
-{{ :​7.ip_phone:​features_and_configurations:​vlan4.png?​nolink |}} 
-<​note>​Akuvox phone allow user to configure either PC or IP port for VLAN feature.</​note>​ 
-<ff sans-serif><​fs medium>​2.Activate VLAN by set Enable.\\ 
-3.Enter assigned VLAN ID.\\ 
-4.Select priority of VLAN.\\ 
-5.Click Submit to save configuration.</​fs></​ff>​ 
-{{ :​6.multimedia_video_phone:​features_and_configurations:​video_vlan2.png?​nolink |}}