meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
6.multimedia_video_phone:features_and_configurations:how_to_setup_multicast [2019/01/23 16:06]
inn
— (current)
Line 1: Line 1:
-====== How to setup multicast ====== 
-===== 1. Instruction ===== 
-<fs medium><​ff sans-serif>​Multicast uses one-to-many mode to communicate in a range. ​ Akuvox Phone can be a listener part and also can be the listened part to realize Multicast communication. \\ 
-Multicast address from 224.0.0.0—239.255.255.255,​ however not all multicast IP addresses are valid. Please consult your administrator for more information. 
-In this feature guide , we use Akuvox R4X Video phone as an example.</​ff></​fs>​ 
- 
-===== 2. Configuration ===== 
-==== 2.1 Listener part ==== 
-<fs medium><​ff sans-serif>​1. To setup Multicast in the website.\\ 
-\\  
-2. Go to the path:​Phone-Multicast.\\ 
-\\ 
-3. Paging Barge:​Choose the multicast priority number ,the range is 1-10.\\ 
-\\ 
-4. Paging priority Active: Enable o disable the multicast priority. The call from High priority listened part can be answered preferentially.\\ 
-\\ 
-5. Setup the listening IP address and port. The IP address need to be same as the listened part. And the multicast port can not be same for each IP Address.\\ 
-\\ 
-6. Click Submit button to save.</​ff></​fs> ​ 
-{{ :​6.multimedia_video_phone:​features_and_configurations:​multicast1.png?​nolink&​600 |}} 
-<​note>​Akuvox Door Phone series only can be used as listener part now. More information please refer to the corresponding door phone user manual.</​note>​ 
- 
-==== 2.2 Listened part ==== 
-=== 2.2.1 Set up from website === 
-<fs medium><​ff sans-serif>​1. Go to the website:​Phone-Ext Key; \\ 
-\\ 
-2. Choose Line Key/DSS Key/Ext Key to setup.(Not all phones supports DSS Key or Ext Key);\\ 
-\\ 
-3. To setup the Type as Multicast paging; \\ 
-\\ 
-4. Set the multicast IP address and port in Value area. The multicast IP address must be same as the listened part. Click Submit to save</​ff>​.</​fs>​ 
-{{ :​6.multimedia_video_phone:​features_and_configurations:​multicast2.png?​nolink&​600 |}} 
- 
- 
-=== 2.2.2 Set up from Akuvox Phone === 
-<fs medium><​ff sans-serif>​1.Enter the Dial interface;​\\ 
-\\ 
-2.Click Ext Key button to enter Ext setting interface;</​ff>​ 
-</fs> 
-{{ :​6.multimedia_video_phone:​features_and_configurations:​multicast3.png?​nolink&​600 |}} 
- 
-<ff sans-serif><​fs medium>​3.Click Add Key;\\ 
-\\ 
-4.To setup the Type as Multicast Paging;\\ 
-\\ 
-5.Input the label you need;\\ 
-\\ 
-6.Set the multicast IP address and port in Value area. The multicast IP address must be same as the listened part. Click Confirm to save.</​fs></​ff>​ 
-{{ :​6.multimedia_video_phone:​features_and_configurations:​multicast4.png?​nolink&​600 |}} 
- 
-=== 2.2.3 After you finish the intercom value settings === 
-<fs medium><​ff sans-serif>​1.Press Apps Button {{:​6.multimedia_video_phone:​features_and_configurations:​multicast5.png|}} . Left slide to enter WIDGETS interface, find ExtKey. Drag it to the main interface;</​ff></​fs>​ 
-{{ :​6.multimedia_video_phone:​features_and_configurations:​multicast6.png?​nolink&​600 |}} 
- 
-<fs medium><​ff sans-serif>​2.Enable the Extkey;\\ 
-\\ 
-3.Click Save button to save.</​ff></​fs>​ 
- 
-=== 2.2.4 Using Multicast === 
-<fs medium><​ff sans-serif>​1.Then press the Multicast Paging key;</​ff></​fs>​ 
- {{ :​6.multimedia_video_phone:​features_and_configurations:​multicast8.png?​nolink&​600 |}} 
-<fs medium><​ff sans-serif>​2.The multicast call is answered automatically.</​ff></​fs>​ 
-{{ :​6.multimedia_video_phone:​features_and_configurations:​multicast9.png?​nolink&​600 |}}